Sydney Termite Field Evidence Gallery

Thermal imaging being used as one inspection tool to investigate temperature patterns around an internal wall.

A moisture reading being taken at an internal wall during a termite inspection.

A technician checking an internal wall during a targeted termite investigation.

Damage and loose material exposed at the base of an internal wall during inspection.

Damaged timber exposed beneath internal trim for closer assessment.

A concealed wall area opened to investigate deterioration behind the finished surface.

Moisture staining and deterioration in a concealed area that warrants closer investigation.

Timber exposed behind a door or wall trim during inspection of concealed damage.

Damaged material exposed along a floor and wall junction during investigation.

A wall cavity opened to inspect concealed damage and material behind the lining.

Close inspection of deteriorated material inside an opened wall section.

A timber section showing substantial internal deterioration after being exposed.

Severely deteriorated timber photographed at close range during field work.

Exposed subfloor timbers showing deterioration in an accessible inspection area.

A substantial mud lead visible on masonry at a building junction.

Close field view of termite activity and soil material during inspection.

Termite mudding visible around a masonry and timber junction.

An in-ground termite station being serviced in a paved area.

An opened in-ground monitoring station during a service visit.

An in-ground termite station installed in a lawn beside the building.

A labelled termite monitoring station prepared for field servicing.

Bait or monitoring material being handled during a termite station service.

External treatment being applied along a paved perimeter beside the building.

Termite-management product photographed as part of a treatment setup.

Treatment equipment positioned at a building edge during post-construction work.

Targeted treatment work being carried out along an exterior masonry perimeter.

A prepared treatment line along a concrete perimeter during barrier installation work.

A protected service penetration photographed during pre-construction termite-management work.

Close view of termite-management detailing around a service penetration before the slab is completed.

Perimeter termite-management work installed alongside a new concrete slab.

A Goliath Pest Solutions technician beside a branded service vehicle at a job site.

A technician applying a Goliath property-protection notice after service work.

A technician carrying out external treatment work around a building perimeter.

A technician working inside a property during a termite service visit.

A branded Goliath Pest Solutions service vehicle at a Sydney residential job.

An in-ground termite monitoring station photographed during field servicing.

An opened in-ground termite station showing the internal monitoring area during a service visit.

Thermal imaging being used during an internal termite investigation.

A moisture meter being used at an internal wall during a termite inspection.

Severely deteriorated external timber exposed during field inspection.

A deteriorated timber member in a subfloor area photographed during inspection.

A timber section opened to reveal concealed internal deterioration.

Close view of heavily deteriorated timber exposed during investigation.

Moisture and organic growth beside a building perimeter, a condition worth addressing during termite-risk management.

Fungal growth at a damp wall junction illustrating why moisture conditions matter during termite inspections.

Targeted liquid treatment being applied within an accessible subfloor area.

External liquid treatment being applied along a property perimeter.

Post-construction treatment equipment set up along a paved exterior perimeter.

A prepared drill point in paving during post-construction termite barrier work.

A trench being treated alongside an external foundation wall as part of termite-management work.

Injection equipment positioned along an exterior treatment line.

A broad view of slab reinforcement and service penetrations during pre-construction termite-management work.

Physical termite-management material installed along a construction junction before completion.

A protected service penetration within slab reinforcement before concrete placement.

Pre-construction detailing around service penetrations before the slab is completed.

Termite-management material installed along a slab perimeter during construction.

An accessible subfloor area showing masonry piers and structural timbers during inspection.

An accessible timber and corrugated construction detail photographed during inspection.

Damaged timber exposed within a subfloor or concealed building area during investigation.