AS 3660.1 Termite Management for New Building Work
AS 3660.1 termite management is a key reference point for subterranean termite management systems used in new buildings and new building work. For builders, owner-builders and project teams, the practical challenge is making sure the selected system suits the construction detail, is installed at the right stage and is documented properly.
Goliath Pest Solutions works with Sydney builders and property owners on termite management and chemical treatment solutions for new work, extensions and relevant construction stages. We can discuss the proposed scope, site access, construction detail and installation timing before work starts.
Why termite management needs to be planned before the relevant construction stage
Termite management is easier to coordinate when the builder, installer and other project parties understand the construction sequence before the work is covered, poured, paved or otherwise made difficult to access. The system also needs to suit the building detail rather than being treated as a generic add-on.
Review the construction detail
Slab edges, penetrations, joints, perimeter conditions, extensions and adjoining structures can affect what management approach is practical.
Confirm the selected system
The proposed termite management system should match the design, product requirements and the project documentation. Different systems solve different access and construction problems.
Coordinate installation timing
Some work is stage-dependent. Booking the installer after a critical area is covered can create avoidable complications or require a different solution.
Builder-facing termite system installation in Sydney
Goliath can assist builders who need a termite management installer for suitable residential building work, extensions and associated termite protection scopes. The starting point is the project detail: what is being built, what system has been specified or proposed, which areas are accessible, and what stage the job has reached.
For chemical termite management work, the installation method can vary with the construction. Depending on the approved scope and site conditions, work may involve soil treatment, treated zones at relevant building interfaces, perimeter detailing, drilling and injection after concrete is in place, or other system-specific methods.
Early review gives us a better chance to identify access, sequencing and documentation requirements before the project reaches the installation stage.
Useful information to provide
- Site address and project type
- Plans or relevant construction drawings
- Proposed termite management system
- Slab, subfloor or extension details
- Current construction stage
- Requested installation timeframe
Why this helps
- Reduces late-stage surprises
- Clarifies treatment access
- Helps align installer and builder timing
- Supports accurate quoting
- Allows system-specific preparation
- Improves project documentation
The Standard describes a management framework, not one universal “termite barrier”
One of the most common sources of confusion is the assumption that AS 3660.1 means every building receives the same barrier. In practice, termite management is a system-design question. The selected approach needs to work with the building and the products or methods being used.
Physical and construction-based measures
Some projects use physical termite management components, termite-resistant materials or construction methods intended to make termite entry more difficult to conceal or easier to detect.
Chemical termite management
Chemical treated zones can form part of a termite management strategy where suitable. Product label requirements, installation details, access and ongoing management all matter.
AS 3660.1 and AS 3660.2 address different stages
These two parts of the AS 3660 series are often searched together, but they should not be treated as interchangeable.
| Reference | Main context | Typical search intent |
|---|---|---|
| AS 3660.1:2014 | Design and construction of subterranean termite management systems for new buildings and new building work. | Builders, new homes, extensions, pre-construction termite management, installation planning. |
| AS 3660.2:2017 | Guidance for management of subterranean termites in and around existing buildings and structures. | Existing homes, termite inspections, active termite assessment, treatment and ongoing management. |
Standards Australia currently lists both editions above in its catalogue. Always check the current edition and project requirements before relying on a standard reference.
What builders should keep with the termite management records
Exact documentation depends on the system and project, but termite management should not disappear into the build with no record of what was installed. Clear records make future inspection, maintenance, warranty and renovation decisions easier.
System identification
Record the product or termite management system installed and the areas covered by the scope.
Installation information
Retain relevant installation documentation, treatment records, notices or certificates provided for the work where applicable.
Ongoing requirements
Keep inspection, maintenance and warranty requirements accessible to the owner rather than relying on memory after handover.
Future landscaping, paving, additions, service penetrations and renovations can affect termite management. Owners should know that changing the building perimeter or concealing inspection zones may alter the way the system performs or can be inspected.
Useful next steps for builders and owners
AS 3660.1 termite management FAQs
Is AS 3660.1 the standard for new building work?
Standards Australia describes AS 3660.1:2014 as covering requirements for the design and construction of subterranean termite management systems for new buildings and new building work. The specific compliance pathway for a project also depends on the applicable building requirements, design and selected system.
Does AS 3660.1 mean I must use one particular termite product?
No. The Standard is not a single product specification. The termite management approach needs to suit the project and the selected system or method. Product approvals, labels, installation requirements and construction details remain important.
Can Goliath work directly with a builder?
Yes. Goliath Pest Solutions can discuss suitable termite management installation scopes with Sydney builders, subject to the project design, access, selected system and required construction stage.
Can an extension need termite management planning too?
New building work can create new joints, slab edges, penetrations and perimeter conditions. The relevant project requirements should be reviewed rather than assuming the existing building’s termite management automatically covers the new work.
Need a termite management installer for new building work?
Send Goliath the project details early so we can review the proposed termite management scope, construction stage and access requirements. Sydney-wide builder and property-owner enquiries are welcome.
